Logo L'Arsenal: Tout pour vos interventions d'urgence

Air-Pak SCBA



The Scott Safety Air-Pak is the most trusted, durable and easy-to-use SCBA in the fire service because only Scott Safety uses redundant safety features, has a low cost of ownership and is firefighter-designed and -tested.

Cliquez sur la photo pour agrandir.

AIR-PAK X3 SCBA

The Scott Safety Air-Pak X3 SCBA was designed not only to exceed the new requirements outlined in the 2013 edition of the 1981 and 1982 standards, but also to exceed customer expectations for what an Air-Pak SCBA should be. Scott Safety incorporated end-user feedback in every step of the design process to deliver to the fire service the next platform of Air-Pak SCBA.

The Air-Pak X3 SCBA improves comfort through new shoulder strap designs, better weight management, and improved hose and wire management resulting in the cleanest SCBA on the market. Fire ground communications are enhanced with the introduction of the AV-3000 HT facepiece, EPIC 3 communications system, a new “external” HUD and optimally positioned “buddy” lights. The Air-Pak X3 SCBA can be ordered with either a CGA cylinder connection or a Snap-Change cylinder connection

  • Available with CGA or Snap-Change cylinder connection
  • Available in 2.2, 4.5, or 5.5 cylinder pressures
  • Dual-redundant pressure reducer​
  • Improved weight distribution
  • New backframe contour design
  • Articulating shoulder harness
  • Improved hose and wire management
  • Optimally positioned “buddy” lights
  • Pre-alarm PASS indication on HUD
  • “External” HUD for easy air status updates of the team
  • Vibralert tactile alarm
  • Reduced cost of ownership
  • Industry-leading “true” warranty
  • Made in the U.S.A.

 

AIR-PAK 75 SCBA

The Air-Pak 75 has been the leading SCBA used by first responders and municipal and industrial firefighters since its introduction in 2007.  The key reasons for its success are:

Redundancy of Safety Features – giving firefighters confidence in their life saving equipment and allowing them to focus on the critical job at hand.

Ease of Use – provides firefighters a simple-to-use and easy-to-understand SCBA that requires minimal training, increases operational efficiencies and reduces training costs.

Low Cost of Ownership – lower costs after initial sale through its rugged design, assembly and warranty policy enable the department to direct valuable funding to training and other PPE rather than on maintenance costs.

In order to meet the 2013 edition of the NFPA 1981 and 1982 standards, the following changes were required:  (1) a new AV-3000 HT facepiece,  (2) a new PASS device equipped with the universal PASS sound (required by NFPA 1982, 2013 edition) and (3) the new 33% End-of-Service Time Indicator (EoSTI) along with a gauge that reflects the EoSTI markings.

  • Available in 2.2, 4.5, or 5.5 Cylinder Pressures
  • Duration available – 30′, 45′, 60′, or 75′
  • Dual Redundant Pressure Reducer
  • Vibralert Tactile Alarm
  • Reduced Cost of Ownership
  • Top Down Convertibility
  • Uses the AV-3000 HT Facepiece (sold separately)
  • Industry’s Best Warranty
  • Made in the USA

 

Website

Click here to visit the Web Site.

NFPA 2013 Edition Scott Products – Brochure (English)

 
print